No Products in the Cart
Aztech Xtreme Aster specific trigger make the most sought after mosfet in the world even better!!!
Our CNC Aluminum Speed Trigger designed in house to work specifically with the Gate Aster optical mosfet to increase trigger response performance with adjustable angle, pre-travel and over travel, the Aster specific top half of the trigger doubles the Gate Aster tuning options and eliminates light caused errors for the optical mosfet.
Our 4th gen adjustable Speed Trigger has multiple grub screw adjustment points to adjust pre-travel, over-travel and angle of the trigger it self.
The Aster top is the reduced errors that can occur when used in bright out door areas caused by an error on an optical mosfet if the optical sensor is tripped by light sneaking into the gearbox through a open type receiver. With the Gate supplied sticker applied to the inside of the gearbox housing mate with the Aster specific Aztech trigger, the sensitivity is just insane.
The Aster Top can be used with gen 3 Xtreme triggers sold prior to September 2021
Our 2 piece design trigger is CNC machined out of a solid block of 6061 Aluminum. The CNC construction makes this trigger very light and durable. The machine work is finished raw or anodized, the trigger is carefully finished with chamfered edges and textured flat face.
The adjustment is via 2 set grub screws, a 1.3mm Allen key is supplied to set pre travel and to adjust the trigger angle which allows you to tune the pre travel. Once set in position you will need to remove and apply a medium grade lock tight to ensure the screws do not self adjust and come loose.
Available anodized in black, silver, shimmery red and metallic gold.